The stainless steel plate has a smooth surface, high plasticity, toughness and mechanical strength, and is resistant to corrosion by acids, alkaline gases, solutions and other media. 

stainless steel coil is a thin steel plate supplied in coils, also called strip steel. There are imported and domestic products, divided into hot-rolled and cold-rolled. According to the needs of different users, we can also order a variety of special-shaped steel materials.In order to ensure that the yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo heat treatment such as annealing, solution treatment, and aging treatment before delivery.

Carbon steel coil is a commonly used metal material with a wide range of applications in many fields. It has good mechanical and processing properties and is widely used in fields such as automobile manufacturing, shipbuilding, construction, and bridges.

Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500°C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability.

The surface of the Galvalume  Coil  is a unique smooth, flat and gorgeous star, and the basic color is silver white. The special coating structure makes it have excellent corrosion resistance. The normal service life of the Galvalume  Coil can reach 25a, and the heat resistance is very good, which can be used in the high temperature environment of 315 ℃; The coating has good adhesion with the paint film, has good processing performance, and can be punched, sheared, welded, etc; The surface conductivity is very good. 

Color Coated sheet is also called color coated sheet, also called organic coated sheet or pre-coated steel sheet, which is based on metal coil (cold-rolled sheet, hot-dip galvanized sheet, aluminized sheet, high aluminum alloy sheet, stainless steel sheet, etc.) It is formed by coating or laminating various organic coatings or plastic films on the surface. Because it is a coil that has been surface-coated in a metallurgical plant and can be directly processed into products by users, it is also called a pre-coated coil.

The C-shaped steel profile is automatically formed by the C-shaped steel forming machine. The C-shaped steel forming machine can automatically complete the forming process of the C-shaped steel according to the given C-shaped steel size. C-shaped steel is widely used in purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets and other building components. In addition, it can also be used for columns, beams and arms in mechanical light industry manufacturing.

The C-shaped steel profile is automatically formed by the C-shaped steel forming machine. The C-shaped steel forming machine can automatically complete the forming process of the C-shaped steel according to the given C-shaped steel size. C-shaped steel is widely used in purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets and other building components. In addition, it can also be used for columns, beams and arms in mechanical light industry manufacturing.

Stainless steel round bar is a common type of steel, which is widely used in industrial production, machining, construction and other fields.

Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.

Square rectangular pipe is a term for square and rectangular pipes, which refers to steel pipes with equal or unequal side lengths. It is rolled from strip steel through process processing. Generally, the strip steel is unpacked, flattened, curled, and welded into circular tubes, which are then rolled into square tubes and cut to the required length.

Galvanized square pipe is a hollow square section steel pipe with a square cross-section shape and size made of hot-rolled or cold-rolled galvanized strip or galvanized coil as a blank, cold-bending, and then high-frequency welding. , or a galvanized square and rectangular tube made by hot-dip galvanizing of the cold-formed hollow steel pipe made in advance.

Cold rolled sheet is a product made by rolling hot-rolled coils at room temperature below the recrystallization temperature. Mostly used in automobile manufacturing, electrical products, etc. Cold rolling is rolling at recrystallization temperature, but generally understood as rolling materials using room temperature rolling.

Hot-rolled sheets, that is, hot-rolled steel sheets and strips, commonly known as hot-rolled sheets, are usually written as hot-rolled sheets, such as hot-rolled sheets, but they all refer to the same hot-rolled sheet. Refers to steel plates with a width greater than or equal to 600mm, a thickness of 0.35-200mm and a steel strip with a thickness of 1.2-25mm.

The steel plate with the pattern on the surface is called the pattern plate, and its pattern is a mixed shape of lentil, diamond, round bean and oblate. The checkered plate has many advantages such as beautiful appearance, anti-skid, enhanced performance, and steel saving. It is widely used in transportation, construction, decoration, floor around equipment, machinery, shipbuilding and other fields. Generally speaking, the user does not have high requirements on the mechanical properties and mechanical properties of the checkered plate, so the quality of the checkered plate is mainly reflected in the pattern formation rate, the pattern height, and the pattern height difference. The thicknesses commonly used on the market range from 2.0-8mm, and the common widths are 1250mm and 1500mm.