Cold rolled sheet is a product made by rolling hot-rolled coils at room temperature below the recrystallization temperature. Mostly used in automobile manufacturing, electrical products, etc. Cold rolling is rolling at recrystallization temperature, but generally understood as rolling materials using room temperature rolling.

Hot-rolled sheets, that is, hot-rolled steel sheets and strips, commonly known as hot-rolled sheets, are usually written as hot-rolled sheets, such as hot-rolled sheets, but they all refer to the same hot-rolled sheet. Refers to steel plates with a width greater than or equal to 600mm, a thickness of 0.35-200mm and a steel strip with a thickness of 1.2-25mm.

AS/NZS 3678 is the Australian and New Zealand standard for structural hot-rolled steel plates, covering grades GR250/300/350 with yield strengths ranging from 250 to 350 MPa. It is suitable for load-bearing structures such as buildings and bridges. It has excellent weldability and is comparable to ASTM A36 (GR250) and EN S355 (GR350). Carbon content ≤0.2%, manganese content 1.5-1.6%, compliant with AS 4100 Structural Steel Design Code.

ASTM A656 steel plate is a high-strength low-alloy steel used in structural applications. In structural applications, light weight and good formability are essential. ASME A656 steel plates are manufactured in different grades of 50, 60, 70 and 80 to the specified yield point.

ASTM A202 grade is divided into: A, B, boiler vessel plate is mainly used for welding boilers and other pressure vessels. There are two grades of ASTM A202 boiler vessel steel: Grade A and Grade B. The thickness of ASTM A202 boiler vessel plates is limited to 2 inches.

EN10025-2 steel plate is a low-alloy high-strength structural steel, which is made of carbon structural steel by adding a small amount of alloying elements.

DIN 17100 ST37 is a carbon structural steel widely used in construction, machinery and manufacturing industries. It has good mechanical properties and can be used to manufacture various mechanical parts.

ASTM A514 steel is available in several grades: A, B, C, E, F, H, J, K, M, P, Q, S, and T, all of which have the same mechanical properties. ASTM A514 steel plates are conventionally quenched and tempered steel. ASTM A514 steel plate is known for its high yield strength, weldability and toughness. ASTM A514 steel is a special high-strength steel, mainly used as building structural steel.

A36 is a carbon structural steel plate whose chemical composition and mechanical properties comply with American ASTM standards. This kind of steel plate has good mechanical properties, welding performance and corrosion resistance, and is widely used in construction, bridges, machinery manufacturing and other fields.

ASTM A588 steel is classified into Class A, Class B, Class C, and Class K. The ASTM A588 steel specification is based on the standard specification for high-strength low-alloy structural steel with a lower yield point of up to 50ksi for applications requiring high strength and corrosion resistance.

ASTM A633 steel includes four grades: A, C, D, and E, of which the thickness of grade C can reach 4 inches and the thickness of grade E can reach 6 inches. ASTM A633 steel specification is based on the standard specification for standardized high-strength low-alloy structural steel plate, which requires high notch toughness under low temperature conditions.

Cold rolled sheet is a product made by rolling hot-rolled coils at room temperature below the recrystallization temperature. Mostly used in automobile manufacturing, electrical products, etc. Cold rolling is rolling at recrystallization temperature, but generally understood as rolling materials using room temperature rolling.

Cold rolled sheet is a product made by rolling hot-rolled coils at room temperature below the recrystallization temperature. Mostly used in automobile manufacturing, electrical products, etc. Cold rolling is rolling at recrystallization temperature, but generally understood as rolling materials using room temperature rolling.

Cold rolled sheet is a product made by rolling hot-rolled coils at room temperature below the recrystallization temperature. Mostly used in automobile manufacturing, electrical products, etc. Cold rolling is rolling at recrystallization temperature, but generally understood as rolling materials using room temperature rolling.

Cold rolled sheet is a product made by rolling hot-rolled coils at room temperature below the recrystallization temperature. Mostly used in automobile manufacturing, electrical products, etc. Cold rolling is rolling at recrystallization temperature, but generally understood as rolling materials using room temperature rolling.