Galvanized sheet is a type of steel that is coated with zinc for protection by an electroplating process. The galvanized layer is applied to cold rolled steel at low temperatures. So it is also known as cold galvanized steel.

Characteristics：Weather proof; heating insulation; fireproof; anti-rust; sound insulation; long life span: more than 20 years. Corrosion Resistance: the aluzinc coating surface protects the base steel not only by providing barrier to corrosion elements, but also by the sacrificial nature of the coating.

Electric welding mesh is made by welding high-quality low-carbon steel wires, followed by surface passivation and plasticization treatment such as cold plating (electroplating), hot plating, PVC coating, etc. Achieve a flat mesh surface, uniform mesh, firm solder joints, good local machining performance, stability, good weather resistance, and good corrosion resistance.

Characteristics：Weather proof; heating insulation; fireproof; anti-rust; sound insulation; long life span: more than 20 years. Corrosion Resistance: the aluzinc coating surface protects the base steel not only by providing barrier to corrosion elements, but also by the sacrificial nature of the coating.

Corrugated roof sheets has the advantages of both organic polymers and steel plates. It not only has good colorability, formability, corrosion resistance, and decorative properties of organic polymers, but also has high strength and ease of processing of steel plates. It can be easily Blanking, bending, deep drawing, welding and other processing. This makes the products made of organic coated steel sheets have excellent practicability, decoration, processability and durability.

Stainless steel plate surface is bright and clean, with high plasticity, toughness and mechanical strength, acid, alkaline gas, solution and other media corrosion.It is an alloy steel that does not rust easily, but is not absolutely rust free.Stainless steel plate refers to the atmosphere, steam and water and other weak medium corrosion of steel plate, and acid steel plate is acid, alkali, salt and other chemical corrosion medium corrosion of steel plate.
Stainless steel pipe are light weight and are widely used in the manufacture of mechanical parts and engineering structures. Mainly used in petroleum, chemical, medical, food, light industry, mechanical instrumentation and other industrial pipelines and mechanical structural components

Galvanized steel wire rope is also called aviation steel wire rope. The single wire of galvanized steel wire rope has a specified zinc layer weight. The twisting of galvanized steel wire rope is the same as that of ordinary round strand steel wire rope, but according to the working conditions of the steel wire rope, there are different requirements for the zinc layer thickness of the raw steel wire: the special and I galvanized steel wire rope wire with a diameter of 0.2 to 5.0 mm can be divided into 3 types of coating thickness:
The zinc coating amount of the thin coating group is 15 to 135 g/m2, which is used for mild corrosion conditions;
The zinc coating amount of the medium coating group is 60 to 200 g/m2, which is used for medium corrosion conditions;
The zinc coating amount of the thick galvanized group is 75 to 260 g/m2, which is used for severe corrosion conditions;

To ensure the quality of the steel wire rope, the surface of the steel wire zinc coating should be smooth, complete, uniform and firm. When the galvanized steel wire is spirally wound on a core rod with a diameter of 5 or 10 times the diameter of the steel wire, the zinc layer should not fall off or crack. The corrosion resistance of the galvanized layer should also be tested accordingly.

Galvanized steel wire ropes are divided into two types: electrogalvanized (cold galvanized) steel wire ropes and hot-dip steel wire ropes.
There is an essential difference between hot-dip galvanizing and cold galvanizing in terms of process. Hot-dip galvanizing relies on physical thermal diffusion to form a coating, first forming an iron-zinc compound, and then forming a pure zinc layer on the surface of the iron-zinc compound. The maximum zinc content on hot-dip galvanizing is only 593g/m2. Hot-dip galvanizing will reduce the mechanical properties of the steel wire. Galvanized steel wire ropes with high strength and high corrosion resistance are mostly twisted with electrogalvanized steel wire. Hot-dip galvanizing is zinc plating in molten zinc liquid at 450-480 degrees.

Hot-dip galvanized steel wire ropes are a market trend and will become the first choice for galvanized steel wire rope users. Because hot-dip galvanized steel wire ropes have a super high cost-effectiveness. The steel wire of hot-dip galvanized steel wire ropes relies on physical thermal diffusion to form a coating, first forming an iron-zinc compound, and then forming a pure zinc layer on the surface of the iron-zinc compound on the surface of the galvanized steel wire. The maximum zinc content on hot-dip galvanized steel wire rope is only 593g/m2. Hot-dip galvanizing is zinc plating in molten zinc liquid at 450-480 degrees.

Cold-drawn round steel bar, also known as cold-drawn round steel, cold-drawn element steel, cold-drawn round steel, and smooth round steel, is a kind of cold-drawn section steel. Whether it is cold drawn round steel or round steel, its shape is round, but the surface of cold drawn round steel is very smooth, its dimensional accuracy is high, and its mechanical properties are high. Because of its high dimensional accuracy, it can be used directly without processing.

Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.
Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.

Electric welding mesh is made by welding high-quality low-carbon steel wires, followed by surface passivation and plasticization treatment such as cold plating (electroplating), hot plating, PVC coating, etc. Achieve a flat mesh surface, uniform mesh, firm solder joints, good local machining performance, stability, good weather resistance, and good corrosion resistance.
Reinforciing welded wire mesh also known as: welded steel mesh, steel welded mesh, steel welded mesh, steel welded mesh, steel mesh and so on
Reinforcing welded wire mesh is the longitudinal reinforcement and transverse reinforcement according to a certain interval arranged at right angles to each other,all intersections are welded mesh together.
According to materials can be divided into: cold rolled ribbed steel bar net,cold drawn round steel bar net,hot rolled ribbed steel bar net,including cold rolled ribbed steel bar net is the most widely used.Reinforced by steel grade,diameter,length and spacing divided into shaping steel mesh and custom bar net two.

1. Application
application in the fields of industrial and civil building floor, roof beam column, wall, concrete pavement, bridge deck pavement, airport runway,tunnel,culvert, dock floor,precast etc
2. Bar diameter
4-14mm
3. Classification
Cold-rolled ribbed mesh, cold-drawn smooth round mesh and hot-rolled ribbed mesh, among which cold-rolled ribbed mesh is the most widely used
4.Features

<1>Significantly improve the quality of steel reinforcement engineering

<2>Significantly improve the construction speed

<3>Strengthening the crack resistance of concrete

<4>It has better comprehensive economic benefits

304L stainless steel is remarkably similar to 304 stainless steel in their chemical composition. but there is one key difference. In grade 304 stainless steel, the maximum carbon content is set at 0.08%, whereas grade 304L stainless steel has a maximum carbon content of 0.03%. This is why the “L” in 304L can be interpreted as extra-low carbon.

202 stainless steel is one of the 200 series of stainless steel, which is a stainless steel with low nickel content and high manganese content, because it is a stainless steel developed to save nickel, so its nickel content is relatively low.

304 stainless steel highly stands out in terms of corrosion resistance, heat resistance, low temperature strength and mechanical properties, being one of the most widely used types of stainless steel. In addition, it has exceptional hot-workability such as stamping and bending, without leaving heat treatment hardening phenomenon.

The C-shaped steel profile is automatically formed by the C-shaped steel forming machine. The C-shaped steel forming machine can automatically complete the forming process of the C-shaped steel according to the given C-shaped steel size. C-shaped steel is widely used in purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets and other building components. In addition, it can also be used for columns, beams and arms in mechanical light industry manufacturing.

The C-shaped steel profile is automatically formed by the C-shaped steel forming machine. The C-shaped steel forming machine can automatically complete the forming process of the C-shaped steel according to the given C-shaped steel size. C-shaped steel is widely used in purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets and other building components. In addition, it can also be used for columns, beams and arms in mechanical light industry manufacturing.